HDPE Socket Fusion 90° Elbow for Water

HDPE socket fusion 90° elbow for water supply, injection molded for reliable fusion joints.

Extra Valuable Service
✧High Quality: ISO Certified Quality ✧Global Transportation Service
✧Free samples& Free Design ✧Full Satisfaction Guaranteed: 5-Year Guarantee

Category: HDPE Butt Fusion Fittings

HDPE Butt Fusion Fittings

Product Overview

HDPE socket fusion 90° elbow for water supply, injection molded for reliable fusion joints. This HDPE socket fusion 90-degree elbow is molded from PE100 resin in sizes 20 to 110 mm, rated PN10 to PN25 under ISO 4427 and EN 12201. The compact right-angle body lets the HDPE socket fusion 90° elbow turn lines neatly at corners, walls and manifolds.

Quick Information

Type: 90° Elbow
Material: HDPE PE100
Size: 20 - 110 mm
Pressure: PN25 / PN20 / PN16 / PN10
Standard: ISO 4427 / EN 12201
Stock: In stock

Specification Table

SPECIFICATION (dn)	L	H	SDR17	SDR13.6	SDR11
L50X90°	115	55	√		√
L63X90°	132	63	√		√
L75X90°	160	70	√		√
L90X90°	180	79	√		√
L110X90°	220	82	√		√
L125X90°	225	87	√		√
L140X90°	240	92	√		√
L160X90°	270	98	√		√
L180X90°	298	105	√		√
L200X90°	325	112	√		√
L225X90°	365	120	√		√
L250X90°	394	129	√		√
L280X90°	435	139	√		√
L315X90°	480	150	√		√
L355X90°	540	164	√		√
L400X90°	600	179	√		√
L450X90°	605	150	√		√
L500X90°	660	150	√		√
L560X90°	720	155	√		√
L630X90°	790	155	√		√
L710X90°	915	180	√
L800X90°	1005	180	√

Key Features

Compact Right-Angle Turn: The HDPE socket fusion 90° elbow changes direction in the smallest space, ideal for corners, risers and meter boxes.
Precision Socket Geometry: Both sockets of the socket fusion 90° elbow hold depth and taper within tight tolerance for full-strength fusion joints.
PE100 Raw Material: Each HDPE socket fusion 90-degree elbow is molded from virgin PE100 resin for high hydrostatic strength and impact resistance.
Leak-Free Homogeneous Joints: The socket fusion 90° elbow welds into a single body with the pipe, eliminating gaskets and future leak points.
Corrosion and Scale Free: An HDPE 90° elbow never rusts or scales, keeping its smooth bore for a 50-year design life.
Pressure-Rated Bend: The HDPE socket fusion 90° elbow carries the same PN rating as the pipe, so no derating is needed at turns.

Production

Raw Material

Every HDPE socket fusion 90° elbow is molded from certified virgin PE100 resin with carbon black UV stabilizer, batch-tested for melt flow rate and density.

Molding Process

Each socket fusion 90-degree elbow is injection molded with right-angle core pins that form both sockets in one cycle, holding the 90° angle within 0.5 degrees.

Quality Control

Batches of HDPE socket fusion 90° elbows are sampled for hydrostatic pressure tests at 20 and 80 degrees C, angle verification and socket depth gauging per ISO 4427 and EN 12201.

Applications

Municipal water networks use the HDPE socket fusion 90° elbow at corners of distribution mains and valve chambers.
Building water systems install this socket fusion 90-degree elbow on risers, wall penetrations and ceiling turns.
Agricultural irrigation relies on the HDPE socket fusion 90° elbow to turn header lines at field edges.
Industrial plants choose the socket fusion 90° elbow for compact right-angle routing around equipment.