Drip Irrigation Connector

Drip Irrigation Connector, 0.05 – 0.2 MPa, PP / PE, for drip and micro irrigation systems.

Extra Valuable Service
✧High Quality: ISO Certified Quality ✧Global Transportation Service
✧Free samples& Free Design ✧Full Satisfaction Guaranteed: 5-Year Guarantee

Category: Irrigation Fittings

Irrigation Fittings

Product Overview

PP / PE drip irrigation connector manufactured from polypropylene (PP), used to join drip lines, laterals and fittings in drip irrigation systems. The PP / PE drip irrigation connector is available in barbed and compression designs for 16mm, 20mm and 25mm pipes, providing secure, leak-free connections in low-pressure irrigation networks.

Quick Information

Diameter: 16mm, 20mm, 25mm
Connection: Barb / Compression
Material: PP / PE
Working Pressure: 0.05 – 0.2 MPa
Stock Availability: In stock
Lead Time: 5–30 days

Specification Table

Item	Spec
Type	Barb / Compression connector
Size	16 / 20 / 25 mm
Material	PP / PE
Working Pressure	0.05 - 0.2 MPa
Application	Drip tape / drip line connection

Key Features

Secure Barbed Grip: The barbed body of the PP / PE drip irrigation connector grips the pipe inner wall firmly, preventing pull-out under operating pressure.
Leak-Free Compression Seal: Precision-molded sealing surfaces on the compression PP / PE drip irrigation connector ensure drip-tight joints for 16 – 25 mm lateral lines.
Tool-Free Installation: Push-fit barbed and hand-tight compression PP / PE drip irrigation connector types install in seconds without special tools or heat gun.
Wide Compatibility: The PP / PE drip irrigation connector fits standard 16mm / 20mm / 25mm drip tapes, micro spray hoses and PE lateral pipes.
UV-Stable PP Body: Made from polypropylene (PP) with UV stabilizers, the PP / PE drip irrigation connector withstands sun exposure and chemical fertilizers in field use.
Full Fitting Range: The PP / PE drip irrigation connector family covers coupling, tee and elbow configurations, supporting complete drip line layout design.

Production

Raw Material

The PP / PE drip irrigation connector is injection molded from polypropylene (PP) resin with UV stabilizer, compliant with ISO 4427 irrigation fitting material requirements.

Molding Process

The PP / PE drip irrigation connector is produced by precision injection molding with multi-cavity tooling. Critical parameters include barb geometry, sealing surface finish and dimensional accuracy to ensure consistent sealing performance and interchangeability across cavities.

Quality Control

Each batch of PP / PE drip irrigation connector is sampled for pull-out force, pressure resistance (0.05 – 0.2 MPa), dimension inspection and visual defect check; test reports are archived for traceability.

Applications

Drip Line Layout and Repair: The PP / PE drip irrigation connector joins and repairs 16 – 25 mm drip tapes in greenhouse and field layouts.
Micro Spray Hose Connection: The PP / PE drip irrigation connector links micro spray hoses to PE main lines for mist irrigation in nurseries and greenhouses.
Lateral to Submain Branching: Barbed tee PP / PE drip irrigation connector branches laterals from submains without additional tools.
Greenhouse Watering Networks: The PP / PE drip irrigation connector supports complete greenhouse irrigation networks with coupling, elbow and tee combinations.
Garden and Landscape Drip Systems: The PP / PE drip irrigation connector is ideal for residential garden, rooftop and landscape drip watering installations.