HDPE Butt Fusion Cross for Water

HDPE cross fitting manufactured from PE100 for four-way pipe connections in water supply systems.

Extra Valuable Service
✧High Quality: ISO Certified Quality ✧Global Transportation Service
✧Free samples& Free Design ✧Full Satisfaction Guaranteed: 5-Year Guarantee

Category: HDPE Butt Fusion Fittings

HDPE Butt Fusion Fittings

Product Overview

HDPE cross fitting manufactured from PE100 for four-way pipe connections in water supply systems. All four outlets of this HDPE butt fusion cross share the same diameter, letting two lines intersect and divide without changing size. The HDPE butt fusion cross covers OD 63 - 315 mm in PN12.5 - PN16 ratings per ISO 4427.

Quick Information

Type: Cross
Material: HDPE PE100
Size: OD 63 - 315 mm
Pressure: PN16 / PN12.5
Standard: ISO 4427 / EN 12201
Stock: In stock

Specification Table

SPECIFICATION dn	L	H	SDR17	SDR13.6	SDR11
63	198	63			√
75	225	70			√
90	260	78		√	√
110	285	80		√	√
125	295	85		√	√
160	352	88		√	√
200	400	92		√	√
225	415	92		√	√
250	480	103		√	√
315	555	103		√	√
355	640	140	√		√
400	650	112	√		√
450	740	140	√
500	810	150	√
560	875	150	√
630	960	160	√
710	1072	180	√
800	1202	185	√

Key Features

Equal Four-Way Flow: The HDPE butt fusion cross intersects two same-size lines, splitting or combining flow on all four outlets.
One-Piece Molded Body: The HDPE butt fusion cross has no seams, so the intersection resists full line pressure from any direction.
PE100 High-Strength Material: Every HDPE butt fusion cross is molded from virgin PE100 compound rated for a 50-year design life.
Leak-Free Fusion: All four ends of the HDPE butt fusion cross weld with standard butt fusion machines for a monolithic intersection.
Rated PN12.5 - PN16: The HDPE butt fusion cross matches common PE100 pipe classes from OD 63 to 315 mm.
Corrosion-Free Service: The HDPE butt fusion cross never rusts or scales, keeping all outlets at full bore capacity for decades.

Production

Raw Material

Each HDPE butt fusion cross is molded from certified PE100 black compound with uniform carbon black dispersion, compliant with ISO 4427 and EN 12201.

Molding Process

Injection molding forms the HDPE butt fusion cross with multi-axis cores that guarantee identical bore diameter and square alignment on all four outlets.

Quality Control

Batches of HDPE butt fusion cross fittings are gauged for end diameter, outlet squareness and wall thickness, then sampled for hydrostatic strength per ISO 1167.

Applications

Municipal grid intersections use the HDPE butt fusion cross where two distribution mains cross and interconnect.
Irrigation block layouts rely on the HDPE butt fusion cross to divide flow equally into four directions.
Fire-ring mains install the HDPE butt fusion cross at grid nodes for redundant flow paths.
Industrial plant networks choose the HDPE butt fusion cross for compact equal-size four-way junctions.